Printing strings from the Polish manufacturer Devil Design are available in a wide range of colours and the manufacturer guarantees a consistent thickness of the printing string with a tolerance of +/- 0.05 mm.
TPU filament - thermoplastic polyurethane in the form of filament, used for 3D printing with
Filament wound on a spool, vacuum packed with a moisture absorber. The spool contains 1
kg of pure material. It can be used in all FFF printers that are not protected from outside suppliers and open
source structures prior to use. Use of filament in printers with bowden type extruder (with filament
guide tube) may be impossible or very difficult. TPU is a material with high chemical resistance, including oils
and lubricants. TPU prints are characterized by high flexibility and very good layer bonding.
The print string is vacuum packed together with a moisture absorber and stored in a cardboard box. Each package contains a label with recommended print temperature settings.
The dimensions of the coil are as follows: outer diameter 200 mm, inner opening 52 mm, width 70 mm. The total weight of the coil including packaging is 1,4 kg.
Colors | Šedá |
---|---|
BambuLab AMS | Yes |
Fits BambuLab spool ? | Yes |
Weight | 1000g |
Speed print | Yes |
Country of origin | European Union |
String diameter | 1,75mm |
Temperature Nozzle °C | 230-250 |
Bed Temperature °C | 90-100 |
Nozzle type (recommended) | Hardened |
Closed chamber | It's recommended |
Diameter tolerance | ± 0,05 mm |