Filament BambuLab PLA MATTE Dark Blue Refill [1,75mm, 1kg]

News Suitable for AMS Refill

Price

21,79 EUR incl. VAT

Manufacturer

Product code

P01454

Weight

1 kg

Add to favourites Add to compare list Shipping and Payment

Description
Discussion0

Bambu PLA Matte

Achieve high-quality prints with a smooth, fine-grained finish using Bambu PLA Matte. Ideal for professionals and hobbyists alike, it adds an elegant touch to your 3D project.

Elegant Matte Finish

Bambu PLA Matte significantly reduces visible layer lines, offering a smooth, non-glossy appearance that makes your prints stand out. Its sleek, refined look is perfect for design projects, architectural models, and display pieces.

A Palette of Soft, Subtle Colors

Select from a curated range of elegant, muted colors that beautifully complement the matte finish, ideal for art, fashion designs, and décor projects.

Easy to Print, High Quality

Bambu PLA Matte delivers premium results at speeds of up to 270 mm/s* without the need for extensive adjustments.

* 0.4mm nozzle, 0.4mm line width, 0.2mm layer height

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Parameters

Colors	Blue
BambuLab AMS	Yes
Fits BambuLab spool ?	Yes
Weight	1000g
Speed print	Yes
Country of origin	European Union
String diameter	1,75mm
Temperature Nozzle °C	195-230
Bed Temperature °C	25-40
Nozzle type (recommended)	Brass
Closed chamber	Not required
Diameter tolerance	± 0,03 mm

Download

Bambu_PLA_Matte_MSDS.pdf (pdf, 1.5 MB)

Bambu_PLA_Matte_Technical_Data_Sheet.pdf (pdf, 359.5 kB)

Refill-bambulab_spool_wide_modded_v2.stl (stl, 2.6 MB)

Refill-bambulab_spool_narrow_modded_v2.stl (stl, 2.8 MB)

Bambu-Filament-Guide-EN.pdf (pdf, 1.9 MB)