Filament BambuLab PLA Brown Refill
New-user Friendly & Easy to Print
Bambu PLA Basic is designed to be extremely user-friendly, making it an ideal choice for beginners or those new to 3D printing. What’s more, PLA Basic enables users to achieve high-quality prints consistently, without the need for extensive adjustments or advanced printing settings.
High-printing Quality
Bambu Lab's PLA filament stands out for its high print speed, and excellent appearance. Experience the benefits of smooth and flawless prints with superior quality that exceeds expectations.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
Instructions for Printed Spool
When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).
Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.
Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.
Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.
Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).
Step 2. Tear apart and pull out the plastic strips.
| Colors | Brown |
|---|---|
| BambuLab AMS | Yes |
| RAL | 2013 |
| Fits BambuLab spool ? | Yes |
| Weight | 1000g |
| Speed print | Yes |
| Country of origin | European Union |
| String diameter | 1,75mm |
| Temperature Nozzle °C | 195-230 |
| Bed Temperature °C | 25-40 |
| Nozzle type (recommended) | Brass |
| Closed chamber | Not required |
| Diameter tolerance | ± 0,03 mm |
| Colors | Brown |
|---|---|
| BambuLab AMS | Yes |
| RAL | 2013 |
| Fits BambuLab spool ? | Yes |
| Weight | 1000g |
| Speed print | Yes |
| Country of origin | European Union |
| String diameter | 1,75mm |
| Temperature Nozzle °C | 195-230 |
| Bed Temperature °C | 25-40 |
| Nozzle type (recommended) | Brass |
| Closed chamber | Not required |
| Diameter tolerance | ± 0,03 mm |
