3DPower Basic PETG - versatile!
3DPower Basic PETG filament is a very popular material for 3D printing. It is perfect for users who want to print functional parts. Its popularity is mainly due to the fact that it combines the properties of both PLA and ABS, and is relatively easy to print, and at the same time mechanically durable. PETG filament is made of components approved for contact with food. 100% recyclable.
The 3DPower PETG filament is characterized by high impact strength, good flexibility and virtually no shrinkage. The softening point of PETG is much higher than that of PLA, around 75 ° C. The filament can be used to print elements resistant to chemicals. The prints are characterized by a high gloss surface.
Our filament can be used with most FDM 3D printers. It will be perfect not only for people who are just starting their adventure with 3D printing, but also for advanced users.
Why 3DPower Basic PETG filament?
- Effective print surfaces with a noble appearance
- Versatile and easy to use
- Easy to print
- No shrinkage
- Recyclable
- Easy to print over a wide temperature range
- Variety of colors
Filament technical data:
- Diameter: 1.75mm
- Dimensional tolerance: ± 0.03mm
- Density: 1.27 g / cm³
- Net weight: 1 kg
- Gross weight: 1.4 kg
Spool dimensions:
- Outer diameter: 200mm
- Mounting hole diameter: 52mm
- Width: 68mm
Recommended printing parameters:
- extrusion temperature: 230-250 ° C
- bed temperature: 60-80 ° C
- cooling: 50-100%
- printing speed: 30-90 mm / s
The filament should be used on printers with a heated table. In the event of adhesion problems, we recommend the use of an adhesive.
The 3DPower Basic PLA filament can be printed, among others on the following devices: Anet, AnyCubic, CraftBot, Creality, Flashforge, Kodak, MakerBot, Modix, Monoprice, Prusa, Raise3D, RatRig, ZMorph, Voron, Vshaper and many others.
Colors | White |
---|---|
BambuLab AMS | Yes |
RAL | 9016 |
Weight | 1000g |
Speed print | Yes |
Country of origin | European Union |
String diameter | 1,75mm |
Temperature Nozzle °C | 230-250 |
Bed Temperature °C | 60-80 |
Nozzle type (recommended) | Hardened, Brass |
Closed chamber | Not required |
Diameter tolerance | ± 0,03 mm |