Anycubic ECO UV Resin White

Resin Plant-Based is a standard easy-to-print material made from soybean oil. It complies with EN 71-3:2013, making it suitable for toy printing, and ensures that no microplastics leak from prints. It is also biodegradable.

It is safe and extremely low odour - made from soybean oil, with no VOCs, BPA or harmful chemicals. It also meets the EN 71-3:2013 safety standard.

Easy to use and amazing colors - high precision and fast curing for LCD 3D printing and high quality pigments provide vibrant colors. Shake thoroughly before use to fully mix the ingredients and distribute the color paste evenly in the resin, otherwise uneven coloration of the print may occur.

Fast curing and exposure time - Optimized curing time for Anycubic Photon ensures better print quality. Bottom layer exposure: 60-80s; Normal exposure: 8-10s.

Wide compatibility - sensitivity to 355nm to 405nm UV light. Compatible with most LCD 3D printers.

Warning and Storage - When printing a larger model, increase the contact of the build plate with the model or reduce the fill density to avoid wrapping. Store in a dry and dust-free place at 15℃ -35℃ and protect from sunlight.

Parameters:

Wavelength: 355-405nm
Hardness: 84D

Storage and Use: Store away from light at room temperature (sunlight is a strong source of UV radiation!) to prevent the resin from hardening. It is recommended to store sealed at 15℃ -35℃. Lower temperature causes higher viscosity of the resin (heavier flow). Excessive dustiness or humidity may affect the print quality.

Use: Shake thoroughly before use and avoid using the resin in high light areas. Wear gloves and maintain good ventilation when working. In case of accidental contact, rinse with plenty of water as soon as possible and seek medical attention if you feel unwell. Use high concentration alcohol for approximately 30 seconds to clean reprinted models (95% or higher concentration recommended). The resin has a shelf life of up to 18 months.