3DLac

When printing using FDM/FFF methods, some printing materials may become more susceptible to deformation due to temperature changes. This phenomenon often causes them to deflect away from the printing surface, which can lead to inaccuracies or failure of the entire printing process. To minimize this problem, 3DLAC has been developed to provide better adhesion of the material to the substrate. This odourless spray is easy to apply, for example on a clean glass surface, and can be easily washed off with water after printing without leaving any residue. Once the pad has cooled, most printed models can be removed with a simple touch, without the need for force.

Product details
Volume: 400 ml, enough for more than 600 applications per print area.
Use: Apply the spray from a distance of approximately 20 cm in a thin, even layer on a smooth and well-cleaned surface. Do not attempt to remove prints from a hot pad, always wait until the pad has cooled.

Advice for use
Apply the spray in a thin and even layer.
Remove prints after the pad has cooled to prevent damage.